Ring Die Maintenance and Repairing

BY James Wang
Using a ring die pellet mill, you may be told that ring die is the core of a pellet mill. It is so vital for it has direct effect on the operation of a ring die pellet mill, such as the performance and the quality of the pellets. Also, the maintenance or the replacement cost of ring die is relatively high. Being a smart investor, you have to know how to maintain and repair ring die and save your pocket.

Ring Die Maintenance

Ring die maintenance

It is recommended that the following seasonable routine maintenance work be carried out regularly:

As we all know that acidic residue can block and corrode the die holes and to result the die to start hard when put back into production, so it is necessary to feed a non-corrosive oily mixture into the pellet fuel making machine to drive out the residues to prevent such problems from happening.

The ring die can be soaked or boiled in oil to soften the material if the ring die does not discharge material due to blockage. Then the material can be pushed out of the holes when reusing. If the blockage still can not be eliminated, drill out the material with an electric hand drill and then clean the die with oily material mixed with fine sand.

The working surface of the ring die will become uneven and the material guide angle of the die hole will become flat because of abrasion after being used for sometime. When this happens, the bumps on the working surface must be ground smooth and the material guide angle must be re-chamfered. Necessary restoration is important for prolonging the working life of a ring die.

Ring Die Repairing Machine

The Ring Die Repairing Machine

As we know from above, ring die needs regular maintenance. And when we maintain it we need a repairing machine to help us. The ring die repairing machine is a machine that can be used to repair ring die. For example, when ring die holes is blocked by some material and can not be pushed out, it can used to drill out the blockage. We can also use it to re-chamfer the ring die when it being worn or we can use it to polish ring die holes so that it can push pellet with high quality and more efficiency. During the operation, the wear and tear of ring die is inevitable. We should repair it in time to make sure the quality pellet production. A ring die repairing machine can help you to make sure the ring die to service longer instead of replacing new ring die for new ring die will cost you more.

Additional pellet mill guide about ring die pellet mill or ring die usage and maintenance is offered if interested.

Contact us to get a Free Proposal for Biomass Pellet Production Line Today !
Want instant communication ?
Tel:0086-372-5965148

Email:info@akgbioguide.com

ring die pellet mill
Ring Die Pellet Mill
Wood Chipper and Crusher
Wood Chipper and Crusher
Hammer Milll
Hammer Milll
Ring Die
Ring Die
Ring Die Repairing Machine
Ring Die Repairing Machine
Roller Shell
Roller Shell
Forced Feeding Blade
Forced Feeding Blade
Material Siever
Material Siever
Material Hoist
Material Hoist
Pellet Mill Cooling Device
Pellet Mill Cooling Device
Pellet Packing Mahcine
Pellet Packing Machine
sitemap
Copyright 2001-2011 www.akgbioguide.com All Rights Reserved